Daiwa Maverick and Demon Blood Offshore Combo

The Daiwa Maverick 6000 and Daiwa Saltist Demon Blood 7ft3 -2/3  offshore combo is the perfect combo for the boat and landbased fishing. This versatile combo is suitable for all types of fishing for fish such as Kingfish, Snapper and Mulloway. Or casting stickbaits for Mackerel and Tuna, throwing plastics over reef flats or vibes and micro jigs into deepr holes up north, this combo will do it all. The Maverick 6000 is a very strong and tough little reel, equipped with 12kg of drag. 

The Daiwa Saltist Demon Blood 7ft3 -2/3  rated rod can comfortably be used off the boat or off harbour wharves and rockwalls. It has a regular action in the tip perfect for casting and working lures, and heaps of power down low for fighting big fish. The reel comes spooled with Daiwa J Braid x8 30lb 300m which is a super-strong, smooth, and abrasion-resistant line which is ideal when fishing for kingfish and snapper around heavy structure. 

Combo Consists of:

• Daiwa Saltist Demon Blood 7ft3 -2/3 
• Daiwa Maverick 6000
• Daiwa J Braid x8 30lb 300m Chartreuse

DAIWA 21 DEMON BLOOD SPINNING FISHING RODS

Daiwa’s Demon Blood range has been synonymous with the tough and often brutal fishing which Australia is so famous for. In 2021, Daiwa has redeveloped the Demon Blood to bring a new level of performance and expanded the range to cater for the ever-growing demand for sportfishing actions suitable for casting, or jigging for hard-fighting predators.

The first thing you’ll notice about the new Demon Blood is the return of the distinctive red colour. A throwback to the original series, the red area not only looks fantastic but signifies the section of the blank where Daiwa has included 3DX carbon. 3DX is Daiwa’s exclusive carbon technology which creates an interlocking weave of high-modulus carbon fibre which significantly increases torsional stiffness, reducing twisting and ultimately leading to longer casts and more consistent performance. The upgrades don’t stop there either, Daiwa’s new X45X Full Shield has been incorporated from where the 3DX finishes, throughout the entire rod blank. The next iteration from Daiwa’s famous X45, X45X Full Shield is up to 25% more efficient in its benefits of increased torsional stiffness and increased stiffness to weight ratio. That means the new Demon Bloods not only are lighter than their predecessors but will outperform them as well.

Fuji components outfit the new blanks with Alconite ringed stainless-steel guides and DPS reel seats with locking nuts across the range. A few key points of the new Demon Blood are the use of reversed MN frame guides as stripper guides across the series. By reversing an MN frame Fuji guide, line slap across the frame is significantly decreased resulting in longer casts and less tangles. Daiwa then combines this reverse stripper with ‘K’ series anti-tangle guides towards the tip sections of the rods where the line has been brought under control by the stripper guides and line slap on the angled frame of the ‘K’ series guides is a non-issue. This is the preferred guide method for heavy tackle casting and has become the standard across the Daiwa range.

The all-new range of Demon Blood rods has been expanded to cater for the growing demand of lure casting to pelagic species such as mackeral, GT, tuna and Kingfish with actions covering every conceivable requirement from all around the country.

If you’re looking for a new outfit to tame some monsters from the deep or maybe chase some addictive topwater action on the reef, look no further than the brand new, redeveloped range of Demon Blood rods from Daiwa.

 

X45X FULL SHIELD

X45X Full Shield Technology is 25% more efficient than standard X45 technology. With increased torsional stiffness, blanks armed with X45X resist blank twist during casting & jigging. This characteristic prevents the blank from losing stored energy during the cast, ensuring that every bit of force you put into your cast, is transferred through the blank and ultimately to your chosen lure.

3DX

3DX supports the lower power section of the rod by knitting densely packed carbon fibers in 3 directions to achieve a six wrap rectangular weave. Power through the blank under load is distributed evenly in all directions allowing it to maintain its profile and form. This process confines the rod’s power to the lower section of the rod, increases power, eliminates blank twist and collapse, all the while reducing angler fatigue.

HVF NANOPLUS

Through the use of nano resin control technology in the blank construction process, Nanoplus allows for increased graphite density to be achieved within a graphite rod blank.

V JOINT

Bias construction within the ferrule allows it to flex with the rod, eliminating the weak, unbending spot caused by ordinary ferrules. The result of this revolutionary technology is a multi-piece blank that matches the performance of one-piece blanks in flex, power and responsiveness.

MODEL	TYPE	SECTIONS	LENGTH	ACTION	TAPER	CAST WT	REC LINE	SKU
20 DEMON BLOOD S73-2/3	Spin	2 (butt)	7'3"/221cm	Medium Heavy	Fast	15-45g	PE 2-3	16152

DAIWA 22 MAVERICK 6000-XH SPINNING FISHING REEL

Arriving end March

Daiwa 22 Maverick Spinning Fishing Reels Full Range Here

Long-time Daiwa fans will recognise the MAVERICK name and colours, a throwback to the days of old, the new MAVERICK MQ is a brand-new saltwater spinning reel with the potential to turn heads, not only with its bold looks but also with what’s under the bonnet. Sporting a Monocoque (MQ) aluminium one-piece body provides MAVERICK MQ with the building blocks of what makes this reel unique and truly special. Inside the MQ body sits a G1 Duralumin drive gear, the same exact gear set that is found in the world-renowned 20 SALTIGA and 21 CERTATE SW. This large diameter, G1 drive gear gives MAVERICK MQ unmatched power and strength for its class and pushes the boundaries on giving anglers more affordable options to tackle the world’s largest predators. The high-spec features don’t end there, with MAVERICK MQ also sporting both a MAGSEAL body and MAGSEAL ball bearing equipped line roller for ultimate saltwater durability. Daiwa’s MAGSEAL is the perfect way to seal a reel’s internal components from damaging saltwater ingress. A one-piece seamless airbail directs line into the roller for troublefree usage and is installed on Daiwa’s ZAION Air Rotor, a highly stiff and rigid carbon composite material which is lightweight for low inertia start up but incredibly strong to withstand heavy drag settings. MAVERICK MQ is equipped with an aluminium ball knob for comfort and comes in a range of both XH & H gear ratios to suit both topwater lure casting and deep water jigging alike. MAVERICK MQ is available in 8000-20000 sizes and will be a perfect accompaniment to Daiwa’s range of DEMON BLOOD rods, a popular choice amongst keen saltwater anglers.

MODEL	GEAR	WEIGHT	BALL BEARING	DRAG	SPOOL CAPACITY	SKU	PRICE
23 MAVERICK 5000-XH	6.2	435g	7BB (1 CRBB, 1MSBB, 1RB)	12kg	PE 2.5/300m	22140	$599.00
23 MAVERICK 6000-XH	6.2	430g	7BB (1 CRBB, 1MSBB, 1RB)	12kg	PE 3/300m	22141	$599.00